Commercial & office
Communal Area Cleaning: What It Covers and How to Arrange It
By SeaLight Shine13 min read

Communal area cleaning is the regular cleaning of the shared parts of a building that no single resident or tenant looks after: entrance halls, stairs, landings, corridors, lifts and bin stores. To arrange it well, you agree a written scope (what is cleaned), a frequency (how often) and a way to check the work is done. This guide shows you how to do that for a block of flats, an HMO, a holiday let complex or a shared business building.
TL;DR
- Communal areas are any shared part of a building outside individual homes or units, from the front door and hallways to lifts, drying areas and bin stores.
- A good service lists tasks by area and sets a visit frequency, rather than offering a vague “clean the common parts” promise.
- Frequency depends on the building: weekly is common in general housing, daily in busier or more vulnerable settings.
- Touch points and floors matter most for hygiene and slip safety, so they should be named in the scope.
- We scope every property before booking, so the plan fits your building, not a template.
What counts as a communal area
The shared parts of a building are wider than most people first think. Peabody describes communal cleaning as covering entrances and lobbies, corridors and stairwells, lifts and bin stores, and in some buildings outdoor paths or covered entrances. In short, any shared or public part of where people live.
Portsmouth City Council adds hallways, stairwells, lifts, drying areas, communal balconies and the front door to its list of spaces shared with other residents. Terms differ by nation: in Scotland, Shelter Scotland explains that these are sometimes called common areas or common parts, and can include the close, fire escapes, paths and gardens.
For a business, the same idea applies to shared reception areas, corridors, kitchens, toilets and stairwells in a multi-tenant building or business park. The people who pay are different (a managing agent, a landlord, a residents’ company or a facilities manager), but the job is the same.
Who usually arranges it
Different readers arrive at this topic from different directions:
- Landlords and freeholders of small blocks or converted houses, where several flats share one hall and staircase.
- Managing agents and property managers responsible for a portfolio of blocks, who need consistent standards and a record of each visit.
- HMO landlords, where shared kitchens, bathrooms and hallways are all communal. Our guide to HMO cleaning requirements covers what landlords must be able to prove.
- Holiday let owners with several units behind a shared entrance, path or parking area.
- Business owners in shared offices, units or business parks.
What a communal cleaning service usually includes
A residential block service typically works area by area. The list below draws on a published UK guide to communal cleaning and is a sensible starting point for your own scope.
| Area | Typical tasks |
|---|---|
| Entrance and reception | Floors, entrance matting, glass doors, door furniture, post boxes, door entry panel |
| Hallways, landings, corridors | Vacuuming or mopping, skirting boards, cobwebs, light switches, door handles |
| Stairwells | Each step and landing, handrails, balustrades, window sills |
| Lifts | Floor, walls, mirrors, buttons, door tracks |
| Bin stores | Sweeping and washing down, bins tidied and lids closed, spills and loose rubbish cleared |
| Cycle stores, car parks, external areas | Litter picking, sweeping paths and entrances |
| Glass, windows, light fittings | Cleaned to an agreed frequency |
| Touch points | Handles, push plates, lift buttons and handrails wiped with a suitable product |
Public bodies write these specifications down in detail. The City of London’s Barbican Estate service levels specify daily cleaning of lift lobbies, entrance lobbies, lift floors, walls, control panels and mirrors, and bin areas on weekdays. Weekly tasks include sweeping and mopping lobby stairs, dusting banisters and ledges, and vacuuming carpets.
That split is worth copying. Some jobs need doing every visit, some weekly, some monthly. Putting each task against a frequency stops arguments later about what was and wasn’t included.
Two ways to classify a building
Larger housing providers group their sites by type. Clarion Housing Group’s specification separates simpler sites (corridors, bin areas or chutes, lights, external paths and parking) from sites with extra facilities such as kitchens, offices, a lounge, lifts or communal toilets and bathrooms. It also agrees site-specific tasks and visit frequency at the start of the contract.

You can borrow the thinking without the paperwork. Walk the building and ask whether it has a lift, a shared kitchen, toilets, a bin store, outdoor areas. Each answer adds tasks, time and equipment.
How often shared areas need cleaning
There is no single right answer. The HSE’s workplace code of practice, L24, says workplaces must be kept sufficiently clean and that frequency and standard of cleanliness depend on the nature of the business. The same logic works for any shared building: use drives frequency.
Real specifications show the range. Women’s Pioneer Housing’s communal cleaning specification sets one clean a week on a fixed day for general needs properties, and a daily clean Monday to Friday in sheltered accommodation. It also adjusts the schedule around bank holidays so the weekly clean still happens.
A practical way to choose:
- Count the people. A four-flat conversion and a sixty-flat block with a lift are different jobs.
- Look at traffic and mess. Deliveries, pushchairs, pets, bikes and bin collections all raise the load on entrances and bin stores.
- Consider who uses the space. Vulnerable residents, public-facing business entrances and holiday guests arriving with luggage all justify a higher standard.
- Split the tasks. Floors and touch points more often, windows, light fittings and high dusting less often.
- Plan for bank holidays and peak periods, so a missed visit is rescheduled, not skipped.
If your block also needs a procurement-ready specification, see our guide to block management cleaning specifications, which covers the audit trail managing agents tend to ask for.
Why it matters for hygiene and safety
Shared areas are used by everyone, so they are where dirt and germs travel. Cleaning there is about more than looks.
Slips and trips. The HSE states that slips and trips remain the single most common cause of major injury in UK workplaces, and that contamination is implicated in almost all slip accidents. Regular cleaning to remove contamination helps reduce accidents. For a block, that points to entrance floors in wet weather, stairs, and bin store floors.
Touch points. Infection prevention guidance from Kirklees and Wakefield Councils notes that organisms that cause infection thrive in damp, dirty places, and that door handles, taps, light switches and hard surfaces need special attention during outbreaks. It also sets out a sound method: clean from top to bottom and from clean to dirty, with floors last. Ask any provider to follow that order.
Cleaning before disinfecting. The same guidance explains that thorough cleaning with a neutral detergent removes large numbers of micro-organisms from a surface, and that surfaces cannot be effectively disinfected without being cleaned first. In practice, a wipe-down with the right product, done properly, does most of the work.
Management, not just mopping. The HSE stresses that an effective cleaning regime needs a management system to identify problem areas, act and check the steps have worked, with good communication at every level. A scope plus a simple way to report problems is what makes a service reliable.
Safe cleaning methods
Cleaning should not create new risks. L24 states that cleaning should use an effective and suitable method without exposing anyone to a health or safety risk, including substantial amounts of dust or risks from cleaning agents. For residents, that means signs on wet floors, products stored securely, and work timed away from peak movement where it can be.
The HSE also publishes COSHH essentials for service and retail, covering diluting chemical concentrates, manual cleaning and disinfecting of surfaces, and storing chemical products. It is a useful reference when you ask a provider how they manage the products they bring into your building.
Surfaces matter too. L24 notes that absorbent floors such as untreated concrete or timber, likely to be contaminated by oil or other substances, should preferably be sealed or coated, for example with a suitable non-slip floor paint, and that carpets should be avoided there. That is relevant to car parks, plant rooms and bin stores, and it is something to raise with your managing agent if floors there are hard to keep clean.
Perspective
Most communal cleaning problems we hear about are scope problems. The hallway is clean, but nobody agreed that the bin store, the lift tracks or the entrance glass were included. Or the visits happen on a schedule that suits the cleaner, not the building.
That is why we scope a property before we book it. We look at who uses the space, what the building contains and when it is busiest. Then we agree the tasks, the frequency and the individual needs of the client in writing. We do not believe in a one-size-fits-all package for a shared entrance, because no two buildings are used the same way.
For property managers, we think the best communal service is the one you barely have to think about: the same tasks, done to the same standard, on the days agreed, with a clear route to raise anything that needs attention. A planned scope is how you get there.
Bavorel
How to scope a communal cleaning service
Use this order when you brief a provider. It works whether you manage one landing or twenty blocks.
- List every shared area. Include the outdoors: paths, bin stores, cycle stores, car parks.
- Note the features. Lift, carpets or hard floors, glass doors, shared kitchen, toilets.
- Set tasks per area. Use the table above as a template and remove what doesn’t apply.
- Set frequency per task. Floors and touch points most often, high-level jobs less often.
- Decide who is on site and when. Access, keys, entry codes, quiet hours, bank holiday cover.
- Agree how work is evidenced. One council specification, from Slough Borough Council, asks suppliers to follow British Institute of Cleaning Science best practice or equivalent, and to record each attendance on a schedule with a date and time stamped photograph of the front of the block. You do not need that level for a small block, but a visit log and photos are a reasonable model.
- Agree how to report issues, and how quickly a missed or poor clean is put right.
If your premises are commercial, our commercial cleaning contract checklist goes through contract terms in the same way, and our guide to janitorial services for property managers explains how day-to-day building upkeep fits alongside scheduled cleans.
Special cases
Blocks of flats and converted houses
The core is entrance, stairs, landings and bin store. Add the lift if there is one. Weekly is a common starting point for general housing, as the Women’s Pioneer example shows, and you can step up if the building has heavy traffic.
HMOs and student lets
Shared kitchens and bathrooms are the hardest areas to keep right because they change hands daily. These need a clear scope and records, so that you can show what was done and when.
Holiday let complexes
Guests judge the property from the car park and front door before they reach their unit. Shared paths, entrances and bin areas should be part of the changeover plan. Our holiday let cleaning service plans each property around its own changeover pattern.

Offices and business parks
Reception areas, corridors, kitchens and toilets are the shared spaces visitors see. Zones with different traffic need different frequencies; our guide to office cleaning frequency sets out zone-based schedules.
After building work
If contractors have been through the stairwell, a one-off clean usually comes before the routine service starts. We cover post-construction cleaning among our cleaning services.
What to ask before you appoint a provider
- Will you give us a written scope by area, with task frequencies?
- Will someone view the building before the first visit?
- How are visits recorded, and can we see the record?
- Which products are used on touch points, floors and bin stores, and how are they stored on site?
- What happens on bank holidays, or if a visit is missed?
- Who is the named contact if a resident or tenant reports a problem?
A provider that can answer these clearly has usually thought about the job properly.
Communal cleaning from SeaLight Shine
We are an Ipswich based cleaning company serving Suffolk, south Norfolk and north Essex. Our approach is to scope each property before booking, so the tasks, frequency and individual needs are agreed with you first. We clean for homeowners, landlords, holiday let owners, businesses and schools, and our work is planned around each property’s requirements and schedule.

If you manage shared areas in our region, tell us about the building and we will plan a scope that fits. Start with our commercial cleaning service, or contact us through our main site to arrange a quote. We do not publish prices, because each job is quoted for the specific property.
FAQ
How often should communal areas be cleaned?
It depends on the size of the building, how many people use it and who they are. Published housing specifications run from a weekly clean in general needs housing to a daily weekday clean in sheltered accommodation. Choose a frequency per task: floors and touch points more often, windows and high dusting less often.
What is included in a communal area cleaning service?
Typically entrances, hallways, landings, stairs, lifts, bin stores and touch points such as handrails, door handles and lift buttons. Outdoor areas such as paths, cycle stores and car parks can be added. The exact list should be written into your scope before the first visit.
Who is responsible for paying for communal cleaning?
In many rented and leasehold buildings it is recovered through service charges, as housing associations such as Peabody explain. Your lease or tenancy agreement sets out the detail. For a single landlord or a business, the property owner usually arranges and pays for it directly.
Can residents keep belongings in communal areas?
Not usually. Portsmouth City Council states that no personal items are permitted in communal areas, even if they seem harmless. Clear areas are also easier to clean properly, so it is worth including in resident communications.
Do you cover communal areas outside Suffolk?
We work across Suffolk, south Norfolk and north Essex. Get in touch with details of the property and we will confirm whether we can help.
Sources
- Peabody: What is communal cleaning?
- Portsmouth City Council: Keeping communal areas clear
- Shelter Scotland: Repairs in communal areas
- Communal area cleaning: blocks of flats and shared buildings
- City of London: Barbican Estate SLAs
- Clarion Housing Group: Communal cleaning specification
- HSE: Workplace health, safety and welfare (L24)
- Women’s Pioneer Housing: Communal Cleaning Specification
- HSE: Slips and trips
- Kirklees and Wakefield Councils: Infection Prevention and Control Guidance
- HSE: COSHH essentials for service and retail
- Slough Borough Council: Estates Cleaning Services Specification


